GNSS · Compact rover
Spherefix SP Nano
The same RTK fix and the same tilted-pole shot as the SP30, in 176 grams. Corrections arrive over its own 4G modem, the controller talks to it over Bluetooth, and the whole rover is the head on the pole.

Where it fits
The second rover
Same fix as the SP30, a tenth of the weight, and two things it does not carry. Worth knowing which before you put it on a machine.
Same RTK fix
1408 channels · 5 Hz
GPS, GLONASS, BDS, Galileo, QZSS, SBAS and NavIC, on every band the receiver tracks — the same constellation list as the SP30, and the same ±8 mm + 1 ppm horizontal. Position updates at 5 Hz rather than 20, which is stakeout and topo rather than machine guidance.
Tilted pole
< 2 cm · pole to 60°
The same inertial correction. Hold the tip on the point, lean the pole clear of the wall or the back of the curb, take the shot. You stop levelling the bubble and the shot still lands.
176 grams
60 × 41.3 × 126.3 mm
With the helical antenna on. It goes on a pole your arm does not notice by mid-afternoon, and it travels in a jacket pocket — a second rover for a two-person crew without a second case in the truck.
4G in the receiver
LTE full band · Bluetooth BR, EDR and BLE
A SIM and an NTRIP mount point is the whole setup. There is no internal UHF radio, so it works from a network correction rather than your own base over radio. If you run your own base on UHF, the SP30 is the one you want.
Photographs
On our own jobs
Not a studio. The Nano beside an SP30 for scale, and three Ontario sites it has worked.





Specification
The numbers
Manufacturer figures, as published. Where Spherefix states a condition, we keep it.
GNSS
- 1408Channels
- GPS · GLONASS · BDS · Galileo · QZSS · SBAS · NavICConstellations
- L1C/A · L1C · L2C · L2P(Y) · L5GPS signals
- B1I · B2I · B3I · B1C · B2a · B2bBDS signals
- E1 · E5a · E5b · E6Galileo signals
- G1 · G2 · G3GLONASS signals
- 5 HzPosition update rate
- RTCM 3.x in · NMEA-0183 outCorrection and output formats
Positioning accuracy (RMS)
- ±(8 mm + 1 ppm) H · ±(15 mm + 1 ppm) VRTK
- < 2 cmTilt compensation, pole within 60° of plumb
- 1.5 m H · 2.5 m VSingle point
Connectivity
- LTE FDD and TDD · WCDMA · GSMCellular
- Bluetooth BR, EDR and BLEController link
- Not fitted — corrections over the networkInternal UHF radio
Power
- 3.7 V · 2500 mAhBattery
- > 12 hEndurance
- 5 V / 2 ACharging
Build
- 60 × 41.3 × 126.3 mmSize, including the helical antenna
- 176 gWeight, including the helical antenna
- IP67Ingress rating
- −20 °C to +60 °COperating temperature
- −40 °C to +85 °CStorage temperature
- PC + ABSHousing
- ARM Cortex-A7 1.8 GHz · LinuxProcessor
In the box
- 1 setSP Nano receiver
- 1Full-band helical antenna
- 1Plumb rod adapter
- 15 V / 2 A USB power adapter
Manufacturer's published figures: Spherefix SP Nano datasheet, 2026. Accuracy values are RMS under Spherefix's stated conditions. Spherefix notes that parameters may be updated; ask us for the current sheet before you rely on one figure.
The range
Nano or SP30
Both take the same RTK fix and the same tilted-pole shot. The difference is what else is in the housing, and what it weighs.
SP Nano
176 g. Tilt survey, 4G corrections, 12 hours. No radio, no cameras.
Spherefix SP30
1000 g. Adds a laser, an AR stakeout camera, a 5 W LoRa radio, 20 Hz and 24 hours.
ViewServices
Not just the box
Installation
- Mounted, wired and calibrated
- On your machine, on your site
- Operator trained before we leave
Support
- A number that reaches a real person
- Someone who has stood in the same mud
- Phone and on-site
GNSS data prep
- DWG, DXF and LandXML in
- Machine surfaces and localisations out
- Checked before they reach the cab
Tell us the machine and the job
We will tell you what it needs and what it costs, without a sales call first.